i put and e-cam in mine 95 cobra, and it comes stock with the 1.7 rockers, i was wondering if I should put 1.6 rockers on it, i have heard i would have more power?
APE chip was on car, we took it off, cuz it was makin car run rich and gettin too much gas...we think. After taking the chip off and put wires back together, car wont start? YOu can hear it clicking, regardless if the chip is put back on or not, it wont crank? Anybody know hat is wrong or how...
I want to wire the fog lights up so that when i turn the parking lights on, that I can turn the foglights on at the same time? Anybody know how to re-wire that?
I also need to replace my oil pan gasket, what all do I have to take off to get the oil pan off?
I installed an e-cam in my 5.0 but a friend is wanting me to help him install cams in a 4.6. Is this harder to do than a cam in a 5.0? What all would you have to do to the 4.6?
A few weeks ago I went to downshift when i put it in neutral from 2nd i started to make a stop, and the car died. Ever since then, when i downshift, the car drops rpms and dies unless i mash the throttle, is that the throttle position sensor? Thanx
when i change a cam, what gaskets do i need? I have the intake gaskets and the water pump gasket, i was told i may need valve covere gaskets and timing chain gasket. thanx
I am put an "e" cam in my 95 cobra, i was wondering if I should buy new lifters and valve springs also. Not sure if i need to or not, the car has 68000 miles. And about how long do you think it will take to put a cam in? about 8 hours or so?
I put eibach sport-line springs on my 95 cobra the other day, and it sits a whole lot lower than it did, but i have a friend that has a 95 cobra with the eibach pro-kit and his front end sits lower than mine, he has had them on the car for about 2 months. Is it just that his have settled and...
What is the widest tire that will fit onto the stock 95 cobra wheels? thanx....I was wanting like a 275 or 285, but i don't thin they will fit....thanx
How hard is it to install headers on a 95 cobra? How long should it take to install them. I have installed them on a fox body beofre, but fox bodies have more room. Thanx
I am looking at buying a double "r" hood. It is a cobra r hood, but taller, i think it is like 3 inches tall. Does cervini have this hood, if not, where can I find it? If anybody has one, does it fit good, and how much was it?
I am looking at buying a chip for my 95 cobra. I am not sure what chip I want, what is the best one, and what are your opinions. What all does it do and how much is it and where from... thanx
I am thinking about buying the edelbrock aluminum heads, they are 1k. Is that good way for me to spend my money, i have heard that it adds about 75-80 horsepower and torque. Anybody that has these let me know what u think... thanx
I want a nice drop on the car, so that it looks good and has a pretty good ride. Should I get the pro-kit which lowers it 1.5 inches alla round, or the sportline kit which lowers it 2.0 inches in the front and 1.8 in the rear. Thanx
I am wanting to buy the mac 2 1/2 in. cat-back system with 2 1/2 in tips. I already have a mac pro chamber and i was just wondering if anybody had this setup, or something simlar. What are your thought about it. Does it sound good....is it loud and deep? thanx
I installed a 4.10 gear and i had to get a speedometer gear for the transmission to get the spedometer right. My spedometer was off by about 15mph. I as told to get a 23 tooth speedometer gear. I bought a 23 tooth speometer gear, and the spedometer is still off. Not sure how bad off now, but...
I have a 95 cobra. I have put a mac pro chamber on it, and i wsa wondering what kind of mufflers i should get. I really want 1 chamber flowmasters, I want a LOUD and DEEP sound, so i thought to myself, i don't think i have ever heard a mustang with a pro chamber and 1 chamber flows. I also...
I have a mac pro chamber on my car, and i am going to buy the back "cta-back" system as well. I am thinking that I will buy mac headers since i am gunna have mostly mac exhuast, but i have a friend that has some flowtech headers. I am wanting to buy his, but i also want the whole MAC exhaust...