Search results

Listing this for a friend: Kenne Bell supercharged '04 Cobra 'vert for sale. Car is Torch Red/black top with 85,000 highway miles. Female owner, and has been babied. Car is garage kept, and paint is silky smooth. All mods were installed by Blow By Racing in Boca Raton, Fl. Tinted windows, SCT...

Alright guys, I have a question. It might have been asked before, I searched, but found nothing. So here goes! I have a '01 F150 supercrew. It is well on its way to needing a freshen, and I am serously considering building the bottom end for boost, and tossing on a L eaton, KB, or whipple. No...

I'm listing this for a buddy of mine. This is not my car. He has a super clean 43,000 mile DSG Coupe. Made 595hp/560lbs tq with a conservative tune. He's asking 28,000, But is negotiable. Mods: Lamotta built shortblock, w/ CP Pistons, stock manley rods and crank. (rebuilt at 37,000 miles)...

Of the '03, and my new toy, a 93 SSP coupe (built right, 302R block, all forged, extrude honed performer RPM everything, built 4R70 w/lockup & transbrake, ect ect ect.)

Redfire '03 in Fl. $20,000 obo. edit: new price. $20,000 or best offer. I want it gone. Well, After waging my own personal war with myself, i have decided to put my baby up for sale. redfire with 68,xxx miles. most of the miles were accrued when i first bought it, driving 65+ miles each way...

Well, i just had the thing gone through, added a 26 spline input shaft and billet steel "struts" for the 3/4 synchro assenbly (atleast thats what D&D calls them). The shop that did it said everything looked good and was in good condition. Ive driven it a little (less than 15 miles) and it keeps...

How in the world do you remove these dern things? I'm replacing my clutch, PP, flywheel, ect. and figured i would throw a pilot bearing in while i was at it. i thought it would slide out nice and easy, but nothing ever goes easy when i'm working on my car. and now i have messed it up to where it...

OK. This probably is not Earth shattering info to some of you, however, today i pulled my blower, to 1. install the RR spacer, 2. install the even flow cooling mod, and 3. to update my port. so, to get at the head a little easier, i pulled the lower intake. Well, the small drain in the bottom of...

In Pharmacology, all drugs have two names, a trade name and generic name. For example, the trade name of Tylenol also has a generic name of Acetaminophen. Aleve is also called Naproxen. Amoxil is also called Amoxicillin and Advil is also called Ibuprofen. The FDA has been looking for a...

this vid is extremely ( and i emphasize that) low quality, because it was taped on film, transfered to VHS and the to digital, so its all grainy and stuff. heres the warning, so dont bitch about it. it was me with my upper/lower/port/big shot of n2o combo, playing with a '98 (i think?) rt10...

freakin car rolls out! 153mph whit the trunk open! might be a repost, but i realy dont care. Enjoy! http://videos.streetfire.net/recentvideos/10/wm/22aa8b04-d83f-437b-9344-987f01843b9b.htm

78 pics! these are from the grand rod run, in pigeon forge, TN this weekend. not too many new model cars, mainly old hot rods and such. a few pics are kinda blurry, 'cause i was having issues with my camera and flash. enjoy!

so i bought some cheap, but well made lower controll arms for my solid axle. here lately ive been hearing a loud pop whenever i launch. today i finaly dove in to try and figure out whats wrong. well, i think i might have figured it out:

as the title says, im thinking about going with a ladder bar set up out back. my car has become more of a drag car than a street car of recent, and im seriously considering changing some things around. i realy just want the thing to dead hook on the street (where most of the drag racing occurs...

ok, so im on my 5th alternator. i just added a 4 lbs lower, and i didnt think i needed a larger alt. pulley. well, blew 3, so i orderd a metco 3.4" pulley for the alt. replace the alt, and the pulley. then proceeded to burn up another, and another. my electrical system seems to be fine, and i...

ok, i have a black '01 supercrew F150. a while back i saw the red flamed pinstriping on a Harley truck. i think it was the 02 year that it came on, but anyways, im looking for it. i called ford and they want $360.00 per side, and i think thats freaking retarded. anyone have any clue where i...

just like the title says, a buddy of mine has a low mileage '03 cobra, and he is wanting to swap in a solid. he has 15,000 miles or so on it, and i can attest that its been babied. im in Ocklawaha, Fla 32179 (as is he) and i will do the entire swap (i have a pretty good bit of experince with it...

ok. so i have told a few people on here that 3.5" welds will fit fine up front with a 1/2" spacer and some longer studs. well, they will, just so long as your brake pads are about half worn. today i replaced my pads and rotors. when i bolted up my wheel, i noticed they wouldnt turn. yea, thats a...

she got painted a few weeks ago, and i just got some pics of it on my 'puter from the spring break shootout in orlando. here they are!

any tips? ive broke a craftsman 1/2" ratchet, a snap on 1/2" ratchet, now i have a 3/4 snap on ratchet on it, with a 6' cheater bar. no luck. the cars in 6th gear, with the parking brake all the way up, so the motors not turning over, i just cant get the damn thing to break loose! any tips or...

here are a few street cars from around here. the blue coupe is tim lynch's TT car, and the red camaro is my buddy todds. both of these cars are on the streets around here quite a bit. and the blue coupe has embarrased more than its share of busa's and other sportbikes. here you go! tims blue...

http://www.streetcarforums.com/showthread.php?s=&threadid=35672 Jeff harris just opened a new shop across from american corvett in powder springs. cant beat the price of $45.00 for three pulls. see yall there. :beer:

well, i finaly got around to getting my car back on a dyno. it has been forever, and i have added a couple of things, and subtracted a few more things. these numbers are with a factory catted H pipe, home ported blower, slp catback, 2.8 upper, and a .041 jet in the n2o system (about a 75). 1st...

ok, im about to ditch the 17" factory wheels and go with a 15" front and rear. im probably going to run a 15x3.5 up front and a 15x10 out back. the fronts come with 1.5" of backspacing. will that clear my front 13" brakes? if not, how much of a spacer am i going to need to run? Thanks for any...

Wanted: pics of the black cobra with the slicks and skinnys im trying to find some pics of the black 03 with the bogart wheels and hoosier slicks and skinnys. anyone have any? i would appreciate it greatly :rockon: