noise

Hey guys, i have installed a set of strange 10 way coilovers on my 03 cobra and the ride quality has diminished to the point that i dread driving it to work every morning. A little about my car's mods: full length subframe connectors, UPR K member, UPR tubular A-arms, 250lb x 12" springs with...

I just got some used Weld RT-S 77 wheels for the rear of my 2013 GT500 and driving it makes a squeeking sound on the left side only. Size is 18x10.5. Any idea why this would happen? They were previously on my brother in laws 2014 GT500 and never made that sound. I made sure to triple check the...

Installed 4.30s now have vibration and buzzing at about 75mph....kept the stock driveshaft. Would an aluminum driveshaft take care of it?

So I just had my T56 completely rebuilt because 5th gear failed on me. After I get the transmission back into the car I immediately hear a howl/whine from the transmission with the clutch out and engine running. Well I ignore that and proceed to drive the Cobra. 1st gear whines all the way up...

Alright sooo....I recently just fixed a vibration that I found out to be a bad factory UCA on my 2012 GT. Which ended up damaging my 1 pc driveshaft's yoke I had on there... But before I did that I had gotten new wheels and tires from American Muscle and upgraded to a set of brembos in the...

Hoping to narrow down this sound before I take her to the shop. First, let me introduce you to my 'work in progress', we call her the Animal. She's a great little car. 1995 Cobra SVT 84K miles on her. I'm slowly fixing her up. I recently put on brand new brakes but then she got a little sassy...

I'm looking to tighten up my 2014 GT to improve handling and launch traction. I'm looking into lower control arms, but many reviews mention increased noise and this is something I'd like to avoid at all cost. What brand or types or bushings should I look for or avoid? Also, are shock braces...

https://youtu.be/D-LikkRw5DU Changed throw out bearing started cat and heard this. Noise sounds like its coming from the intake. No idea what this is. Happens at engine shut down. Replaced pcv valve as in read that might be it but the noise persists. Anyone have any ideas? Thanks in...

So I'm lowered on H&R ss Springs and got B&M caster camber plates installed this weekend to align the front. When i got my car back from the alignment shop, the right (passenger side) is making a popping noise when i turn the steering wheel. Its like if the strut doesn't turn freely or the...

I just got done putting cams in may car and just put the crank pulley on now its hard to turn and metal shavings from the timing cover are coming off and a ticking sound. the engine turned fine before i istalled the pulley. The ticking sound sounds like its coming from the crank pully i don't...

Okay, this morning on my way to work I did a couple nice peel outs. After the second one, I slowed down and turned into the neighborhood my work is in. Then I started to hear a random rattling noise from the rear end. Sounds like metal on metal rattle with acceleration at low speeds. What is...

I just bought an 03 cobra and it's gonna need some work to get it up to the standards I want it at. No major performance work needed but theres alot of unwanted noises from different areas that I need advice on. I live in northern GA and need a tech that knows alot about these cars so I'm not...

So lately ive been hear what sounds like a tire hitting the fender during high 1st gear into 2nd. It comes and goes. anyone have this problem before. It's 2012 GT500 around 15000 miles. any and all input is appriciated

I'm kind of at a loss, I had pypes long tubes, off road x installed at my dealership 2 months ago. And I've beat it to hell, and not a single problem. Now when I accelerate I get a weird rattle under my gas petal and my girlfriend can feel it on the passenger side. Any idea what this is?

Hey everyone, you can barely tell from my video but it sounds worse in person. So bad it's to the point I won't let my car go over 2k RPM. The car makes like a metal on metal sound between 2 and 3k RPM. It does NOT make this noise if you floor it through that RPM range, however if you let...

Hey guys, Sorry if this issue has already been covered, but... Does anyone know if the T56 is as stupidly loud (the howl when you're barely on the throttle) as the TR-3650 piece of crap commonly found in our Cobras? I HATE the whine and can't stand it anymore... I've tried sound deadening...

hi im hoping SOMEONE can help me. Ive had my 04 cobra for about two months now and recently after getting a 4 wheel alignment ive been hearing a very noticable rattle when going over small bumps or even just slight surface change. not sure if it has anything to do with the alignment. ive done...

03 Cobra 70k recently replaced the battery and oil change that's it, stared doing this whining sound driving or not, need some help please.

I tried searching this forum several times to avoid opening a new thread just in case others have experienced my problems but the search feature kept timing out. The issue: Noise in the front left region of the car. Popping/Cracking/Squeaking When: When going over speed bumps - I only...

The noise is everywhere! It developed after the dyno day thrashing. I am thinking lifters... Regardless I have to pull it all apart right after I got it all back together : dw : Here is a link to the video. https://www.youtube.com/watch?v=ir2Y-bmVto4&feature=youtube_gdata_player Any...

I have a mere 280 miles on my new Shelby GT500. They were all exhilerating until last night while driving home at the speed limit. Cruising At about 2300 RPM in 3rd gear @60 mph, the car started making a loud baffling noise like I was dragging a large plastic bag. It went on for about 30...

Hi I have a 01 with 25k on it and has cold rattle type noise. It happens around 2500 rpms when shifting. Once up to temp seems to go away. Is this a common problem and do I need to worry about it. What is the noise timing chain tenshioner? :??: thank you.

I recently had a new clutch installed which is a mcloed rst twin disc. I have put the 500 miles on the clutch to break it in as instructed. I think something is not right with it. I feel like there is a vibration in the car I have not noticed before the new clutch especially under power and at...

Have any of you guys had a problem with a squeeking sound from the front wheels? I have a 2003 cobra with 29K miles on it. I just replaced the brakes and rotors all the way around. The squeek went away for about 5 miles... Extremely frustrating, I am leaning towards replacing the front hub and...

Hi, I have a 2002 supercharged harley davidson f150 and i recently put a K&N Intake on it and now when the truck starts when its cold it makes a hissing noise until it warms up. Does anyone know what that is or have experienced it themselves? Thanks